The product range that we are offering encompasses white pigment, acrylic latex, dispersing agent for paint emulsion, antifoaming agent, thickening agent and tackifying agent.
Product List
Product
Function
Titanium Dioxide (Rutile)
White pigment
Hydrocarbon resin
Tackifying agent
Antifoaming agent
Foam inhibitor
Acrylic Emulsion
Synthetic latex binder
Methyl Cellulose
Thickening agent
Polycarboxylate
Dispersing/Grinding aid
Best Paint Products From Top Chemical Manufacturer Company
Paint is made up of four primary components: glue, chemicals, solvent, and pigment. The resin
acts as a binder, holding all of the pigments together. It helps the substance to stick to the
painted wall. Acrylic emulsion polymers are used to bind water-based paint. Acrylic polymers
are used in a wide range of forms and combinations, including methyl and butyl methacrylate.
Polyvinyl acetate is used to bind cheap paints.
Additives are substances that are used to improve the properties of a material. It glides on the
wall with a brush. It is both mould and scuff resistant. Without the ingredients, the drying period
will be longer and there would be sag resistance. Solvents serve as a medium, aiding in the
bonding between pigments and resin. Chemical agents, such as mineral turps, can be used, or
the producer can use pure water.
The processing of paint produces a substantial volume of waste and byproducts. Any paint
production plant has to have a wastewater treatment system on-site. This facility would process
all of the liquids produced on-site. It can also treat and store run-off water. The Environmental
Protection Agency, or EPA, rules must be implemented by these buildings. They must be
tracked 24 hours a day, and record reviews must be done on a daily basis. The facility's
requirements allow for the treatment of all liquid waste on-site. Latex sludge can be recycled
and used as a filler in other materials. Water-based solvents may also be recycled and
repurposed as fuel in other sectors. A clean paint bucket may be reused or disposed of at a
nearby dumping site.
The product range that chemical supplier malaysia offers consists of white pigment, acrylic
latex, dispersing agent for paint emulsion, antifoaming agent, thickening agent and tackifying
agent.
Titanium Dioxide (Rutile)
Titanium Dioxide acts as a white pigment to give our paint that signature white colour.
Hydrocarbon resin
Hydrocarbon Resin acts as a tackifying agents to increase adhesion and stickiness of paint to certain surfaces of walls.
Antifoaming agent
Our Antifoaming agents act as inhibitors of foam to prevent paint from foaming up when you apply them on walls.
Acrylic Emulsion
Acrylic Emulsion acts as a synthetic latex binder to help bind latex to our paints.
Methyl Cellulose
Methyl Cellulose acts as a thickening agent to increase thickness and therefore, amount of paint to spread more of it onto a surface.
Polycarboxylate
Polycarboxylate acts as a dispersing or grinding aid to enhance the dispersion of paint and allows the paint to flow more smoothly
and essentially grind across a surface better.